Change or rekey · Burlington
Smart Lock Installation
Your mother still lives on her own, and the personal support worker, the pharmacy delivery and two siblings all need to get in on different days. Cutting keys for everyone feels wrong; a code for each person, with a log, feels right.
Smart Lock Installation
In plain words
Most of the skill in fitting a smart lock goes into the door rather than the electronics. Motors are patient but not strong, so a bolt that has to be shouldered home will stall, chew through batteries and eventually refuse. The locksmith checks that the bolt slides fully into the strike with the door closed and no hand on it, and corrects hinges, strike pocket or weatherstrip until it does. The bore holes are measured against the new lock's needs, the door's thickness is confirmed, and a reinforced strike goes in with long screws. Only then is the lock mounted, calibrated and programmed.
How the visit goesThe deadbolt is a stiff double-cylinder model that needs a key from both sides, and in the dark hallway finding it is a nuisance. You want a thumb-turn inside, a keypad outside, and a door that locks itself behind you.
Burlington
How the visit goes
Will the bolt travel on its own?
The most important test takes moments and uses no tools. With the door closed and nobody touching it, the locksmith turns the existing thumb-turn with two fingers and feels whether the bolt glides into the strike or has to be forced. A motor has less strength than a hand, so any drag here is drag the smart lock will fight every day until its batteries give out. Hinges that have let the door drop, a strike pocket that is shallow or off-centre, and weatherstrip that pushes the door out of square are the usual culprits, and each is something the locksmith can correct before the new hardware goes on.
Fitting the bolt, the body and the strike
With the door ready, the mechanical parts go in first. The new bolt is set to the door's backset and slid into the edge bore with its face plate flush. The outside assembly, keypad or touch surface, is placed with its cable fed through the cross bore, and the inside mounting plate is fixed so the two halves clamp the door without twisting. Screws are driven by hand rather than with an impact driver, because an over-tightened housing binds the motor. The interior unit is seated on the plate and the tailpiece aligned so the thumb-turn and the motor share the same travel. A reinforced strike with long screws replaces the light original.
Codes you can give and take back
The lock now belongs to your account, and the day-to-day control is yours. Adding a code for a new cleaner, setting a weekend window for a visiting relative or removing the dog walker who moved away is done from the app or the keypad in moments, without a locksmith and without cutting anything. A short list of who holds which code, kept somewhere private, is worth writing on day one so the door's access stays as tidy as it is today. Codes should be unique per person and never shared aloud on the step; where the lock offers one-time or scheduled codes, use them for trades and deliveries and let them expire.
Smart Lock Installation
In the van
- Hinge shims and long hinge screws
- Manufacturer-specified batteries
- Adjustable-backset bolt and faceplate
- Hole saw, spade bit and drilling jig
- Smart deadbolt or smart lever set
What affects the quote
Same fees day, night or weekend
1Travel and access to the property
Distance to the address and how easy the door is to reach, such as a condo with a locked lobby or a rural property at the end of a long drive, are part of any call-out.
2Rekeying the override cylinder and other locks
Repinning the smart lock's backup cylinder to a new key, cutting the keys and bringing the remaining mechanical locks onto the same key are each counted per cylinder and per key.
3Pairing a smart deadbolt with a smart lever on the same door
Some doors get a smart deadbolt only, while others pair it with a smart lever below so both turn from one app and share the same codes. Fitting and programming two devices on one door takes more work than one, confirmed once the door and hardware are seen.
Smart Lock Installation: questions
Fingerprint, fob, code or phone: which is worth having?
It depends on who uses the door. Codes suit everyone and need nothing in hand. Fobs or cards are a favourite for children and for anyone who finds small buttons difficult, since a tap does it. Fingerprint readers are convenient for a household of adults but can be fussy with cold, wet or gloved hands in winter, so pair them with a code. Phone control is for whoever wants alerts and remote checks. Most families end up using two of these.
Can the back door and garage door be put on the same system?
Yes, in one of two ways. Each door can get its own smart lock, all managed from the same app and account, with the same codes working at every door. Or, where the cylinders share a compatible keyway, the other doors can stay mechanical and be rekeyed so a single key operates them and the smart lock's override cylinder alike. Many households do the front door first and add the others later; the account and the codes carry across.
I rent. Can I have a smart lock installed?
Yes, with your landlord's agreement first. Tenancy rules in this province expect a tenant to have the landlord's consent before changing a lock, and expect the landlord to have a working way in, so the sensible route is a short conversation and a note of what will be fitted. A retrofit model that mounts inside and keeps the existing exterior lock and key is often the easiest thing for a landlord to say yes to, since the door is unchanged from outside.
Change or Rekey Locks
Smart Lock Installation near you
The lock services offered in Burlington are grouped the way a door is used. Getting back in when you are locked out. Deciding who holds a working key. Upgrading the hardware so the door resists more than a casual try. Keeping commercial entrances working. Opening and maintaining safes. Each is described below.